Registry Settings Description - Motorola RD5000 Integrator Manual

7 - 8 RD5000 RFID Integrator Guide
NOTE The comport is currently configured for 8 bits, no parity, 1 stop bit.

Registry Settings Description

The RFIDDemo registry file restores the demo settings after a cold boot. If this file is edited, the settings will not be
implemented until a cold boot occurs. Alternatively, on some Motorola devices, the registry file can be launched.
When this is done, a prompt appears asking the user to choose whether to merge these settings into the registry.
The next time the demo is launched, it will use the settings in this file. Do not perform this function while the demo
is running. The Gemini_RFID.exe demo also uses many of these registry settings and can be used to registry
settings. Do not launch the Gemini_RFID.exe demo while the RFIDDemo is running.
provides the RFIDDemo registry file example.
NOTE All DWORD values must be in hex notation.
Table 7-2 on page 7-9