Icmp Ping Window - Motorola RD5000 Integrator Manual

5 - 32 RD5000 RFID Integrator Guide
Wireless Diagnostics Window
Figure 5-40
The
Wireless Diagnostics
•
ICMP Ping - tests the wireless network connection.
•
Trace Route - tests a connection at the network layer between the reader and any place on the network.
•
Known APs - displays the APs in range using the same ESSID as the reader.
•
Quit - Exits the
Option windows contain a back button

ICMP Ping Window

The window allows testing a connection at the network layer (part of the IP protocol) between the reader
ICMP Ping
and an AP. Ping tests only stop when the
if the reader switches between infrastructure and ad-hoc modes.
To open the
ICMP Ping
ICMP Ping Window
Figure 5-41
To perform an ICMP ping:
In the field, enter an IP address or select an IP address from the drop-down list.
1. IP
From the
2. Size
Click
3. Start Test
window contains the following options. Click the option to display the option window.
window.
Wireless Diagnostics
Stop Test
window, click
ICMP Ping
drop-down list, select a size value.
. The ICMP Ping test starts. Information of the ping test displays in the appropriate fields.
to return to the
Wireless Diagnostics
button is clicked, close the
in the
Wireless Diagnostics
window.
application, or
Wireless Diagnostics
window.