Table of Contents
Advertisement
2 - 12 RD5000 RFID Integrator Guide
External Antenna Installation
The external antenna must be professionally installed. Select an accessible mounting location that is free from
obstructions that might inhibit reading.
The external antenna uses the same mounting brackets or mounting platform that the RD5000 uses.
The location should not subject the external antenna to possible damage during loading and unloading of products.
Use the following steps to install the external antenna:
Installing the external antenna is the same as the RD5000 installation procedures:
•
Determine the mounting location.
•
Install the Motorola mounting brackets, or prepare the mounting platform. See
Mounting Brackets on page 2-2
•
Install the shock isolators, see See
page 2-6
or
detailed procedures.
•
Mount the external antenna the same way that the RD5000 is mounted. See
2-9
for detailed procedures.
•
Connect the external antenna cable as described in
or
Locally Fabricated Mounting Platform on page 2-7
Installing The Shock Isolators on The Motorola Mounting Brackets on
Installing The Shock Isolators on The Locally Fabricated Mounting Platform on page 2-8
Installing The Motorola
Mounting The Reader on page
Connect an External Antenna on page
for detailed procedures.
for
1-11.
Advertisement
Table of Contents
Troubleshooting
