Rfidsocketbridge; Rfidsocketbridge Registry File - Motorola RD5000 Integrator Manual

7 - 2 RD5000 RFID Integrator Guide

RFIDSocketBridge

From the desktop window double click the
The SocketBridge can be turned off from the SocketBridge window by selecting File - Exit.
RFIDSocketBridge Window
Figure 7-1
The RFIDSocketbridge application is responsible for managing the reader systems, including:
•
Manages incoming wireless connections to the RFID reading subsystem. Offers support for TCP/IP, or
Bluetooth connections.
•
Monitors battery life, controls battery LEDs, and beeps on low battery.
The RFIDSocketbridge can be configured using the registry in 2 ways.
•
Use a registry editor, or other equivalent tool to change settings directly.
•
Edit rfidsocketbridge.reg using a text editor. Copy to device, cold boot device.

RFIDSocketBridge Registry File

The RFIDSocketBridge registry file restores the demo settings after a cold boot. If this file is edited, the settings will
not be implemented until a cold boot occurs. Alternatively, on some Motorola devices, the registry file can be
launched. When this is done, a prompt appears asking the user to choose whether to merge these settings into the
registry. The next time the demo is launched, it will use the settings in this file.
SocketBridge registry file example.
NOTE All DWORD values must be in hex notation.
RFIDSocketBridge Registry File Example
Table 7-1
; *****************************************************************************************************
[HKEY_LOCAL_MACHINE\SOFTWARE\SYMBOL\RFIDSocketBridge]
; How many seconds without any activity on connection before connection is dropped. (5 second minimum)
"InactivityTimeout"=dword:3C
; If battery power less than 20 percent, then beep if 1, otherwise do not beep.
"BeepOnLowBattery"=dword:1
; If 1, then allow incoming socket connections. If 0, do not .
"SocketConnectionEnabled"=dword:1
; If 1, then allow incoming bluetooth connections. If 0, do not .
"BluetoothConnectionEnabled"=dword:0
; If NULL, then no Bluetooth Pin required to connect. Otherwise, this pin is required for all connections.
"BluetoothPin"="999"
icon in the toolbar to display the SocketBridge window.
Table 7-1 on page 7-2 provides the