Motorola RD5000 Integrator Manual page 56

3 - 10 RD5000 RFID Integrator Guide
NOTE The cradle requires a dedicated port. It cannot share a port with an internal modem or other device. Refer
to the computer user manual supplied to locate the serial port(s).
Upon connection, synchronization occurs automatically.
7.
USB Connection Setup (Windows CE 5.0)
The RD5000 USB setup is controlled through the CTLPanel. The default setting is USB, to confirm or change the
setting perform the following.
From the RD5000 main window (see
application.
Main Windows
Figure 3-10
From main Explorer window (see
CtlPanel window appears (see
Explorer Windows
Figure 3-11
With Port highlighted, confirm that the Com port default value is set to USB Default. To change the value use the
left and right arrow
Figure 3-10) click Start - Programs - Windows Explorer to access the Explorer
Figure 3-10) click Application - CTLPANEL to access the CTLPANEL utility. The
Figure 3-11). Double-click on Comm Settings to access the USB settings window.
buttons to select USB Default.