Charging Spare Batteries - Motorola RD5000 Integrator Manual

Table 1-3
LED Indication
ERROR LED
Green
Green-Flash Red
Red Blinking

Charging Spare Batteries

Use the following accessories to charge spare batteries (outside of the reader):
•
Four Slot Spare Battery Charger
•
Universal Battery Charger (UBC) Adapter.
To charge a spare battery:
Ensure the accessory used to charge the spare battery is connected to the appropriate power source (see
1.
Chapter 3, Accessories
Insert the spare battery into the spare battery charging slot with the charging contacts facing down (over the
2.
charging pins) and gently press down on the battery to ensure proper contact.
The battery starts to charge automatically. The amber charge LED on the accessory lights to show the charge
3.
status. See Chapter 3, Accessories
The battery usually fully charges in less than four hours.
RD5000 LED Indicators (Continued)
Normal operation.
Indicates a momentary error condition.
Service the reader.
for setup information).
for charging indications for the accessory.
Description
Getting Started 1 - 9