Cleaning The Fire - Flavel FSSP00MN Installation, Maintenance & User Instructions

5.3 Cleaning - WARNING
Before attempting any cleaning operation ensure that the
fire has been allowed to fully cool. The Silver Sapphire
case should be gently cleaned with a damp cloth.
NOT UNDER ANY CIRCUMSTANCES USE
ABRASIVE CLEANINGS PRODUCTS ON ANY
SURFACE OF THIS PRODUCT.
Cleaning the Fuelbed
We do not recommend cleaning of the coals or fuelbed components as these are
fragile and damage may result. None of these parts must be washed or
exposed to any cleaning agents or water. Any damaged parts must be
replaced by contacting CFM Europe . (See rear cover of this book for contact
details).
The coals must only be replaced with a complete and genuine replacement set
and the fire must never be run with the wrong number or damaged coals.
The fuel-bed must be carefully re-assembled as stated in section 3.1
USER REPLACEABLE PARTS
The only user replaceable parts on this fire are the fuelbed components and
coals or pebbles which may be replaced as described in the above section.
Replacement of any other parts must be carried out by a competent person such
as a CORGI registered gas installer. The part numbers of the user replaceable
parts are as follows, these are available from CFM Europe Ltd. (See rear cover of
this book for contact details).
Complete Coal Pack B-91480
Coal Fuelbed Matrix B-91500
Coal Fuelbed Front Rail B-91490
Loose Coal Pack B-91510
Complete Pebble Pack
Pebble Fuel-bed Matrix
Pebble Fuelbed Front Rail
Loose Pebble Pack
27
DO
B-91520
B-91540
B-91530
B-91550