Flavel FSSP00MN Installation, Maintenance & User Instructions page 9

Fig. 5
Foam seal to be fitted to
perimeter of firebox
NOTE : Firebox
viewed from Rear in
this image
c) Decide which side the gas supply is to enter the fire from. The gas
connection can be made via the left hand side, right hand side or rear,
to the burner tray inlet elbow which is located at the bottom left hand
side at the front. The gas connection to the appliance should be made
to the isolating / inlet elbow using 8mm rigid tubing. There must be no
soldered joints within the firebox. See Fig. 6a below.
Fig. 6a
Rear Gas Supply
Firebox viewed
from top
L/H/S Gas Supply
Note : Before breaking into the gas supply a pressure drop test should be
carried out to establish that the existing pipework is sound.
Carefully withdraw the fire box from the opening to enable the gas supply and fire
fixing to be completed. Ensure the gas pipe is capped to prevent entry of debris.
Fit the short piece to the left
hand mounting flange of the
firebox.
R/H/S Gas Supply
Restrictor Elbow
Position
9