Table of Contents
Advertisement
5.3 Cleaning - WARNING
Before attempting any cleaning operation ensure that the fire has been allowed to
fully cool. Black painted metal parts should be gently cleaned with a damp cloth.
Cleaning the Fuelbed
We do not recommend cleaning of the coals or fuelbed components as these are
fragile and damage may result. None of these parts must be washed or
exposed to any cleaning agents or water. Any damaged parts must be
replaced by contacting BFM Europe Ltd.. (See rear cover of this book for contact
details).
The coals must only be replaced with a complete and genuine replacement set
and the fire must never be run with the wrong number or damaged coals.
The fuel-bed must be carefully re-assembled as stated in section 3.1
USER REPLACEABLE PARTS
The only user replaceable parts on this fire are the fuelbed components and
coals which may be replaced as described in the above section. Replacement of
any other parts must be carried out by a competent person such as a CORGI
registered gas installer. The part numbers of the user replaceable parts are as
follows, these are available from BFM Europe Ltd. (See rear cover of this book for
contact details).
Coal Pack
L/H Ceramic Front Rail
B-87350
Coal Fuelbed Matrix
B-87300
R/H Ceramic Front Rail
21
B-87340
B-87310
Hide quick links:
Advertisement
Table of Contents
