Parameter Settings - Huawei UPS5000-S-1200 kVA User Manual

UPS5000-S-1200 kVA
User Manual
Table 4-19 Monitoring details
Number
1
2
3
The parameters that have been introduced in the LCD section are not described in the WebUI
section.
The information displayed in Active Alarms and Real-time Data is the same as that on the
LCD, so the information is not described in the WebUI section.

4.2.2.1 Parameter Settings

Figure 4-47 System parameter settings
Figure 4-48 Power unit parameter settings
System Settings
Item
Cabinet No.
Issue 04 (2019-06-25)
Area Function
Running status Displays the power flow and UPS running information.
area
Menu bar Displays alarms and real-time data, sets parameters, and
provides control commands.
The Active Alarms page is displayed by default.
Information Displays system monitoring information.
area
Description
Power unit number. After
power-on, the system identifies
the cabinet SW terminal and
updates the number
automatically. This parameter is
configurable only for power
units.
Copyright © Huawei Technologies Co., Ltd.
4 User Interface
Default Value Value Range
1 1–2
132