Alarms - Huawei UPS5000-S-1200 kVA User Manual

UPS5000-S-1200 kVA
User Manual
Table 4-11 Total runtime
Item
Bypass runtime (h)
Inv. runtime (h)
Table 4-12 Environment data
Item
Ambient temperature (° C)
Ambient humid. (%RH)




4.1.3.2 Alarms

Table 4-13 Alarm display description
Running Item
Active Alarms
Historical Alarms
Buzzer Off
Clear Faults
Issue 04 (2019-06-25)
The Power Cabinet N data in the system running is the same as the Battery Info data in the power unit
running.
The value must be an integer. For example:
 If the value is less than 1, the value takes 0.
 If the value is greater than or equal to 1 and less than 2, the value takes 1.
Module Data: reflects each data of a module.
Battery Detailed Data - Batt. String Data: reflects the voltage, current, SOC, and SOH
data of each battery string.
Battery Detailed Data - String N Battery Data: reflects the temperature, voltage, internal
resistance, current, SOC, and SOH data of a single battery in the battery string.
System
All active alarms
All historical alarms
Buzzer off
Clearing all alarms
Copyright © Huawei Technologies Co., Ltd.
Description
Time for which the UPS runs in bypass mode.
Time for which the UPS runs in inverter mode.
Description
Temperature measured by the ambient temperature and
humidity sensor. (An ambient temperature and humidity
sensor is required. If no sensor is connected, the ambient
temperature sampled by the bypass unit is displayed.)
Humidity measured by the ambient temperature and
humidity sensor. If the sensor is not installed, NA is
displayed.
Power Unit
Active alarms of this
power unit
Historical alarms of
this power unit
-
-
4 User Interface
Bypass Unit
Active alarms of the
bypass unit
Historical alarms of
the bypass unit
-
-
99