Huawei UPS5000-S-1200 kVA User Manual page 86

UPS5000-S-1200 kVA
User Manual
Figure 3-56 Securing the cabinet
----End
Installing a Busbar
The procedure for installing the sealing plate is different. For details about other steps, see the
procedure for installing the busbar.
Step 1 Install the right sealing plate of the input/output unit.
Figure 3-57 Install the right sealing plate
Step 2 Remove the rear sealing plate from the power unit.
Issue 04 (2019-06-25)
When installing the anchor screws at the rear of the fan, remove the bottom cover, tighten the anchor
screws, and reinstall the cover.
Copyright © Huawei Technologies Co., Ltd.
3 Installation
78