Table of Contents
Advertisement
Element HEXIP
Disconnect the unit from its power source. Remove the power cord from the unit. Once the cord has
been removed, you will find that the fuse holder is located inside the power socket. Insert a flat-head
screw driver into the power socket and gently pry out the fuse holder. Remove the bad fuse and replace
with a new one. The fuse holder also has a holder for a spare fuse.
Element HEXIP
Listed below are a few common problems the user may encounter, with solutions.
Unit not responding to DMX:
1. Make sure WiFly address on the unit and your WiFly Transceiver or controller match.
2. Make sure the units WiFly is active.
3. Make sure you have set the correct DMX address and your correct DMX channel mode.
Unit does not respond to sound:
1. Quiet or high pitched sounds will not activate the unit.
2. Make sure that Sound Active mode is activated.
Element HEXIP
Due to fog residue, smoke, and dust cleaning the internal and external optical lenses must be carried
out periodically to optimize light output.
1. Use normal glass cleaner and a soft cloth to wipe down the outside casing.
2. Clean the external optics with glass cleaner and a soft cloth every 20 days.
3. Always be sure to dry all parts completely before plugging the unit back in.
Cleaning frequency depends on the environment in which the fixture operates (i.e. smoke, fog resi-
due, dust, dew).
Element HEXIP
ADJ Products, LLC - www.adj.com - Element HEXIP User Manual Page 25
ORDER CODE
EPC600
EFC800
ITEM
6-PACK SKB CASE
8-PACK CHARGING CASE
Fuse Replacement
Trouble Shooting
Cleaning
Optional Accessories
Hide quick links:
Advertisement
Table of Contents
