Trouble Shooting I Cleaning - ADJ ELEMENT ST HEX User Instructions

Element ST Hex
Listed below are a few common problems the user may encounter, with solutions.
Unit not responding to DMX:
1. Make sure that the WiFly is enabled.
2. Check the setting under "WiFly On with Power".
3. Make sure that the Element ST Hex Wireless Address matches the address set on the wireless
transceiver.
Unit does not respond to sound:
1. Make sure that Sound Active mode is activated under Internal Programs. Sound activity will only
work with Internal Program mode.
2. Quiet or high pitched sounds will not activate the unit.
Element ST Hex
Due to fog residue, smoke, and dust cleaning the internal and external optical lenses must be carried
out periodically to optimize light output.
1. Use normal glass cleaner and a soft cloth to wipe down the outside casing.
2. Clean the external optics with glass cleaner and a soft cloth every 20 days.
3. Always be sure to dry all parts completely before plugging the unit back in.
Cleaning frequency depends on the environment in which the fixture operates (i.e. smoke, fog residue,
dust, dew).
ADJ Products, LLC - www.adj.com - Element ST Hex User Manual Page 22
Trouble Shooting
Cleaning