ADJ ELEMENT HEXIP User Instructions page 19

Element HEXIP
Operating Modes:
The Element HEXIP has five operating modes:
• RGBWA+UV Dimmer Mode - Choose one of the six colors to remain static or adjust the intensity
of each color to make your desired color.
• Sound Active mode - The unit will react to sound, chasing through the built in programs. There
are 16 sound active modes.
• Auto Run Mode - In Auto Run mode, you can choose 1 of 16 color change modes, 1 of 16 color
fade modes, or a combination color change & color fade mode.
• Color Macro Mode - There are 63 color macros to choose from.
• DMX control mode - This function will allow you to control each individual fixture traits with a
standard DMX 512 controller.
RGBWA & UV Dimmer Mode:
1. Plug the fixture in and press the MODE button "r: XXX" is displayed. You now are in Red dimming
mode. Press the UP and DOWN buttons to adjust intensity. After you have finished adjusting the
intensity, or if you would like to skip to the next color, press the SET UP button.
2. When "G: XXX" is displayed you are in Green dimming mode. Press the UP and DOWN buttons
to adjust the intensity.
3. When "b: XXX" is displayed you are in Blue dimming mode. Press the UP and DOWN buttons to
adjust the intensity.
4. When "U: XXX" is displayed you are in White dimming mode. Press the UP and DOWN buttons
to adjust the intensity.
5. When "A: XXX" (Amber) is displayed you are in Amber dimming mode. Press the UP and DOWN
buttons to the adjust intensity.
6. When "u: XXX" is displayed you are in UV dimming mode. Press the UP and DOWN buttons to
adjust the intensity.
7. After you have adjusted the colors to make your desired color you can then activate strobing by
pressing the SET UP button to enter the strobe mode.
8. "FS: XX" will be displayed, this is strobe mode. The strobe can be adjusted between "00" (flash
off) to "15" (fastest flash).
Sound Active Mode:
1. Plug the fixture in and press the MODE button until "SoXX" is displayed. "XX" represents the current
sound active mode (1-16).
2. Use the UP or DOWN buttons to find your desired sound active mode.
3. Press the SET UP button to enter sound sensitivity adjustment. "SJ-X" will be displayed. Use the
UP or DOWN buttons to adjust the sensitivity. "SJ-1" is the lowest sensitivity, "SJ-8" is the highest.
"SJ-0" turns the sound sensitivity off.
Static Color Mode (Color Macros):
1. Plug the fixture in and press the MODE button until "CLXX" is displayed.
2. There are 63 colors to choose from. Select your desired color by pressing the UP and DOWN
buttons. After you have selected your desired color you can activate strobing by pressing the
SET UP button to enter the Flash (strobe) mode.
3. "FS.XX" will be displayed, this is Flash mode. The Flash can be adjusted between "FS.00" (flash
off) to "FS.15" (fastest flash).
ADJ Products, LLC - www.adj.com - Element HEXIP User Manual Page 18
Operating Instructions