System Menu - ADJ ELEMENT HEXIP User Instructions

Element HEXIP
MENU SUBMENU
Address
Channels
DMX MODE
No DMX mode
Delay mode
SLAVE
Slave Setting
Red Dimmer
Green Dimmer
Blue Dimmer
DIMMER MODE
White Dimmer
Amber Dimmer
UV Dimmer
Flash Adjustment
Sound Active
SOUND MODE
Sensitivity Adjust
Color Fade Mode
AUTO Color Change Mode
RUN
Color Change &
MODE
Color Fade Mode
Speed Adjustment
Color Select
STATIC COLOR
Flash Adjustment
MODE
Battery Life Display
BATTERY LIFE
ENERGY SAVE
LOADING
Energy Saving
SET UP
Mode
Load On/Off Select
Display
IR Remote On/Off
Display
OTHER
Normal/Inverted
Menu Lock
Initialization Mode
WiFly Address
WIFLY SET UP
WiFly Function
On/Off
ADJ Products, LLC - www.adj.com - Element HEXIP User Manual Page 16
OPTIONS
DMX Address Setting
~
6 DMX Channel Mode
7 DMX Channel Mode
8 DMX Channel Mode
11 DMX Channel Mode
12 DMX Channel Mode
When the DMX signal is lost or interrupted, the unit will go into BLACKOUT mode.
When the DMX signal is lost or interrupted, the unit will hold at the LAST DMX setting.
When the DMX signal is lost or interrupted, the unit will run an auto program.
Select the unit delay mode
~
Designate the unit as a slave unit in a master-slave set up.
Adjust the intensity of the red color.
~
Adjust the intensity of the green color.
~
Adjust the intensity of the blue color.
~
Adjust the intensity of the white color.
~
Adjust the intensity of the amber color.
~
Adjust the intensity of the UV color.
~
Adjust the flash speed. "00" is Off, "01" is the slowest speed, and "15" is the fastest.
~
Select 1 of 16 sound active programs.
~
Adjust the sound sensitivity. "0" is the lowest level, and "8" is the highest level.
~
Select 1 of 16 color fade modes.
~
Select 1 of 16 color change modes.
~
This mode will run both color change and color fade continuously.
Adjust the running speed of the current mode.
~
Select 1 of 63 static colors.
~
Adjust the flash speed. "00" is Off, "01" is the slowest speed, and "15" is the fastest.
~
Displays the current battery life.
"b---" means that the battery is not being used.
/
"bXXX" means that the battery is in use. "XXX" represents the battery charge percentage.
~
"b000" means that the battery has no charge.
"b100" means that the battery is at full charge.
Activates energy saving mode.
Deactivates energy saving mode.
Activates battery power.
Deactivates battery power.
LED display is always on.
LED display turns off after 30 seconds.
IR remote function is activated.
IR remote function is deactivated.
LED digital display is normal.
LED digital display is inverted.
Deactivate display lock. (Display lock is not active)
Activate display lock. (Press the MODE button for 3 seconds to unlock the display)
Activate display lock two.
Default to factory settings.
Set the WiFly address.
~
WiFly function is active.
WiFly function is deactive.
FUNCTIONS
(Press UP-DOWN-UP-DOWN to unlock the display)

System Menu