Table of Contents
Advertisement
power sensor, the sensor type is displayed on the screen as in Figure 4.18.
Since no power source is connected to the sensor yet, an alarm message "-
- - -" is displayed on the screen
No sensor type is displayed on the screen if the instrument fails to recognize
a sensor type during the initialization process.
4.4.2
Setting Power Meter
All the keys used to set the power measurement are displayed as
screen menu keys on the screen.
Initialize
calibration data from the sensor.
Frequency
the frequency setting affects the calibration data, be sure to set
the accurate center frequency for reliable measurement results.
Figure 4.18 Power Sensor Initial Screen
: Initializes the power sensor and downloads the
: Sets the frequency of signals to measure. Note: As
99
Advertisement
Table of Contents
