Advertisement
Advertisement
Table of Contents
Related Manuals for Protek 1006
Summary of Contents for Protek 1006
- Page 1 Protek 1000 Handheld Scope Meter Series USER’S MANUAL 1006 / 1020 / 1160 / 1260...
-
Page 2: General Safety Notice
General Safety Notice 1. Safety Terms and Symbols Terms in this manual: These terms may appear in this manual: WARNING: Warning statements identify conditions or practices that could result in injury or loss of life. CAUTION: Caution statements identify conditions or practices that could result in damage to this product or other property. - Page 3 Connect and Disconnect Properly. Connect the probe output to the measurement device before connecting the probe to the circuit under test. Disconnect the probe input and the probe reference lead from the circuit under test before disconnecting the probe from the measurement device. Observe All Terminal Ratings.
- Page 4 Digital Scope Meters Protek1000 Series digital scope meters offer exceptional waveform viewing and measurements in a compact, lightweight package. Protek1000 series is ideal for production test, field service, research, design, education and training involving applications of analog circuit tests and troubleshooting. Product features: Dual Channel, Bandwidth: 60MHz...
-
Page 5: User's Interface
User’s Interface The first thing to do with a new scope meter is to know its front panel. This chapter helps to be familiar with the layout of the keys and how to use them. Read this chapter carefully before further operations. Front Panel (Figure 1-1): The buttons allow you to use some of the functions directly but also bring up the manual keys on the screen, which enable the access to many measurement features associated... - Page 6 Figure 1-2 Front Panel Description Description 1. LCD Display. 2. F1～F5: Sets or switch options for the menu. 3. Arrow Keys 4. Hori: Shows Hori menu 5. TRIG: Shows TRIG menu 6. Level: Adjust the trigger level. 7. RUN/STOP: key for running or stopping the operation. 8.
- Page 7 Display screen Figure 1-3 LCD Display screen Description 1. Shows running status. 2. Shows delay time 3. Shows location of the current waveform in the memory. 4. Shows the trigger position in the memory. 5. Shows the trigger mode. 6. Shows the trigger source. 7.
-
Page 8: Function Check
Function Check Perform this quick functional check to verify that your scope meter is operating correctly. Turn on the instrument. Use the power cords designed for your scope meter only. Use a power source that delivers 100 to 240 VACRMS, 50Hz. Turn on the scope meter. WARNNING: To avoid electric shock, be sure the scope meter is properly grounded. -
Page 9: To Compensate Probes
To compensate probes Perform this adjustment to match the characteristics of the probe and the channel input. This should be performed whenever attaching a probe to any input channel the first time. 1. From CH1 menu, set the Probe attenuation to 10X (press CH1→Probe→10X). Set the switch to 10X on the probe and connect it to CH1 of the scope meter. -
Page 10: To Display A Signal Automatically
WARNNING: To avoid electric shock while using the probe, be sure the perfection of the insulated cable, and do not touch the metallic portions of the probe head while it is connected with a voltage source. To display a signal automatically Protek1000 Series has an Auto feature that automatically sets up the scope meter to best display the input signal. - Page 11 Figure 1-6 Menu Operation The following example shows how to use the tool’s menus to select a function, as shown in the following figure. Figure 1-7 The Menu 1. Press the MENU ON/OFF key to display the Function Menu on the bottom of the screen and the corresponding optional settings on the bottom.
-
Page 12: Specifications
The / button moves the signal vertically. Also notice that the channel symbol on the left side of the display moves in conjunction with the button. To set up the horizontal system 1. Change the time base. or button changes the time base in a 1-2-5 step sequence, and displays the value in the status bar. - Page 13 Horizontal Protek1006: 150MSa/s Protek1020: 250MSa/s Sampling Protek1160: 1GSa/s Protek1260: 2GSa/s Equivalent 50GSa/s Sampling Protek1006: 5ns/div ~ 1000s/div Time Base Protek1020: 2ns/div ~ 1000s/div Range Protek1160: 1ns/div ~ 1000s/div Protek1260: 1ns/div ~ 1000s/div Time Base ±50ppm Precision Trigger Source CH1, CH2 Protek1006: Edge, Pulse Width, Alternative Mode...
- Page 14 Maximum Input AC: 10A DC: 10A Current Input Impedance DISPLAY TFT LCD Type 5.7 Inch width LED Backlight Display Display 240 (Vertical) X 320 (Horizontal) Resolution Dots INTERFACE USB host/Device 2.0 Full Speed Supported Optional RS232, LAN POWER SOURCE Line Voltage AC 100V ~ 240V, 50Hz ~ 60Hz;...