Table of Contents
Advertisement
Electrostatic discharge can damage your Analyzer when connected or
disconnected from the DUT. Static charge can build up on your body and
damage the sensitive circuits of internal components of both the Analyzer
and the DUT. To avoid damage from electric discharge, observe the
following:
Always use a desktop anti-static mat under the DUT.
-
Always wear a grounding wrist strap connected to the desktop
-
anti-static mat via daisy-chained 1 MΩ resistor.
Connect
-
the DUT before you start operation.
Observe all the general safety precautions related to operation of equipment
powered by mains.
The protection provided by the equipment may be impaired if the
equipment is used in a manner not specified by the manufacturer.The
definitions of safety symbols used on the instrument or in the Manual are
listed below.
Storage
Before first use store your equipment in the factory package at
environment temperature from 0 to +50 ºС and relative humidity up to
95% (at 25ºС).
After you have removed the factory package store the equipment at
environment temperature from +10 to +35 ºС and relative humidity up
to 80% (at 25ºС).
Ensure to keep the storage facilities free from dust, fumes of acids and
alkalies, aggressive gases, and other chemicals, which can cause corrosion.
8
clamp on the body of the Analyzer to the body of
Advertisement
Table of Contents
