Table of Contents
Advertisement
2.
2.1
General Information
Unpack the Analyzer and other accessories. Check the contents of the
package against the list specified in section 1.4.1. Connect your A434L to
the AD-DC Adaptor(12Vd.c., 5A) or Li-ion Battery(8.4Vd.c. MAX, 7800mAh)
power source by means of the Power Cable supplied with the instrument.
Warm-up the Analyzer for 20 minutes after turning the power on.
Assemble the test setup using cables, connectors, fixtures, etc, which allow
DUT connection to the Analyzer.
Perform calibration of the Analyzer. Calibration procedure is described in
section 4.1.3.
2.2
Power Adaptor
The equipment uses following power supply.
Product: Switching Power Supply Adaptor
Model no. FSP060-DBAE1
AC INPUT: 100-240Va.c.~, 1.5A, 50-60Hz
DC OUTPUT: 12.0Vd.c. 5.0A MAX
Manufactured by: Zhonghan Electronics (Shenzhen)
Trade mark: FSP GROUPINCUC
21
Advertisement
Table of Contents
