Table of Contents
Advertisement
2.5.1
DC Power Connector
2.5.2
RF OUT/Reflection
2.5.3
Ethernet Port
Provides input for the DC power
source via an AC-DC adapter.
In case of emergency, to avoid danger
of electric shock or the like, pull the
power cable out of the power outlet
or the DC power connector of the
instrument.
Output(Accepts)
output(input) with a frequency range from
5MHz to 4GHz.
50ohm N-type RF Connector, maximum
allowable input is +25dBm.
Ethernet port allows the user to connect the
Analyzer to a LAN (Local Area Network).
This connection enables the user to control
the instrument using an external PC. Used
for upgrading the instrument's firmware.
10BASE-T & 100BASE-TX support
CAT5e UTP Cable uses
an
internal(external)
37
Advertisement
Table of Contents
