3.5.1
Numeric Data Entry
Multi keys operate as follows when a user is prompted to input values by
pop-up window.
Numeric keys from 0 to 9 are used to input user setting numbers.
The plus/minus (+/-) key is used to assign positive or negative
numbers in the user settings.
The period key (.) is used to input numbers with decimal points.
3.5.2
Specific Function Keys
Multi keys are used in VSWR, DTF, and Cable Loss measurement mode.
Unless otherwise specified, multi keys do not support Power Meter mode.
1. AMP
AMP (amplitude) defines a manual setting for the scale on the Y-axis of the
graph. It can be selected in VSWR, DTF, and Cable Loss measurement mode.
Figure 3.6 Multi Keys Layout
61