Save State - Protek A434L Operating Manual

4.5.1.3 Save State

This function is to save the user setup configuration and the calibration
data. Up to 20 setups can be saved.
Action
This function is available in VSWR, DTF, Cable Loss and Power Meter
measurement mode.
1. Press the Save key.
Save State
2. Select the
3. Select the Memory Type.
Internal/USB
4. Select the File Name.
5. Press the Enter key.
Saving setup based on the procedure in Table 4.10 saves the setup
configuration listed in Table 4.11. The instrument setting can be configured
by loading the saved setup later
Measurement
Mode
VSWR
Cable Loss
VSWR
Cable Loss
VSWR
Cable Loss
VSWR
Cable Loss
104
screen menu.
Table 4.9 State Saving Procedure
Parameters
Cal On/ Off status
Cal Data
Frequency
Trace Point
Note
Multi key.
Screen menu key.
Select either an internal memory or
an external USB memory.
Use character or number.
Remarks
Recall preceding calibration data.
Start, Stop, Center Freq and Span
126, 251, 501, 1001, 2001 points,