Table of Contents
Advertisement
«AMP» key
«Freq/Dist» key
«Trace Point» key
«Marker» key
«AMP» AMP (amplitude) defines a
manual setting for the scale on the Y-
axis of the graph. It can be selected in
VSWR,
DTF,
and
measurement mode.
«Freq/Dist» key causes different
screen
menu
to
depending on a measurement mode.
In VSWR or Cable Loss measurement
modes it opens a frequency screen
menu and in DTF measurement mode
it opens a distance screen menu.
«Trace Point» Trace point is used to
select the number of data points to
take during a VSWR and Cable Loss
measurement mode. There are four
data points available: 126, 251, 501,
1001 and 2001. The default number
of trace points is 1001.
«Marker» A marker is used to get
the data on the specific point of a
trace. A total of six markers can be
displayed on the screen and each
marker
can
independently. Placing a marker on
the trace displays the marker's Y
coordinates next to the marker's
position. If the marker table is turned
on, both X and Y coordinates of all
activated markers are displayed.
Cable
Loss
be
displayed
be
assigned
31
Advertisement
Table of Contents
