Preparing For Programming - Hitachi SJ700-2 Series Instruction Manual

1.2 Preparing for Programming

To create user programs with the easy sequence function of the SJ700 inverter, you must prepare the
following devices and software:
(1) SJ700 inverter
(2) Personal computer (PC) (Windows system)
(3) Optional programming software EzSQ
(4) Optional PC-inverter connection cable
PC port: serial RS232C port
Inverter port: Operator-connection port
The following figure shows the basic system configuration for programming.
Installation
Optional programming
software EzSQ
- Install EzSQ on your Windows personal computer, and connect the personal computer to the SJ700
inverter via the PC-inverter connection cable.
- After completing these preparations, you can operate EzSQ to create a user program and download it
to the SJ700 inverter.
Optional PC-Inverter
Commercially
available Windows
personal computer
1 - 5
Chapter 1 Introduction
connection cable
Programming
Downloading
User
program
Uploading
SJ700
SJ700 Inverter