Hitachi SJ700-2 Series Instruction Manual page 43

(6) "Insert"
The "Insert" command inserts a blank line in the program.
1) Select the line where to insert a blank line.
2) Select "Insert" from the "Edit" menu on the menu bar.
(You can also execute this command by pressing the "Ctrl + I" keys on the keyboard.)
3) A blank line is inserted between the selected line and the preceding line.
(7) "Find"
The "Find" command searches the selected area ("Code Window" or "Data Window") to find a
specified string.
1) Select "Find" from the "Edit" menu on the menu bar.
(You can also execute this command by clicking the
"Ctrl + F" keys on the keyboard.)
2) The "Find" dialog box appears.
3) Enter the string to be found, and then click the [Find] button to start searching.
4) Clicking the [Cancel] button closes the "Find" dialog box.
5) Clicking the [Replace] button switches to the "Replace" dialog box.
(8) "Replace"
The "Replace" command searches the selected area ("Code Window" or "Data Window") to find a
specified string and replace it with another specified string.
1) Select "Replace" from the "Edit" menu on the menu bar.
(You can also execute this command by pressing the "Ctrl + H" keys on the keyboard.)
2) The "Replace" dialog box appears.
3) Enter the string to be found and the string to replace, and then click the [Find] button to start
replacement.
4) Clicking the [Cancel] button closes the "Replace" dialog box.
5) Clicking the [Find] button switches to the "Find" dialog box.
Chapter 4 How To Use EzSQ
icon under the menu bar or pressing the
4 - 11