Printing A Program; Referencing The Help Information; Version Information - Hitachi SJ700-2 Series Instruction Manual

4.14 Printing a Program

You can print out the currently edited program.
(1) Select "Print" from the "Run" menu on the menu bar.
(You can also execute the "Print" command by clicking the
the "Ctrl + P" keys on the keyboard.)
(2) The "Print" dialog box appears.
(3) Select the checkbox for the print-target ("Code Window" or "Data Window"). Printing of the code or
data part of the program is enabled.
(4) Click the [OK] button to start printing.
(5) To close the "Print" dialog box, click the [Cancel] button.
(6) Clicking the [Options] button opens the "Page Setup" dialog box.

4.15 Referencing the Help Information

You can reference the electronic data of this Instruction Manual from the "Program Editor" window.
(1) Select "Help" from the "Help" menu on the menu bar.
(You can also execute the "Help" command by pressing the F1 key on the keyboard.)
(2) The PDF file containing the electronic data of this Instruction Manual opens.
Note: Opening the PDF file requires Adobe Acrobat Reader to be installed on your personal computer.

4.16 Version Information

You can reference the version information on EzSQ.
(1) Select "About Program Editor" from the "Help" menu on the menu bar.
(2) The "Version" dialog box appears.
(3) To close the dialog box, click the any button.
Chapter 4 How To Use EzSQ
icon under the menu bar or pressing
4 - 19