Uploading A Program From The Inverter - Hitachi SJ700-2 Series Instruction Manual

4.11 Uploading a Program from the Inverter

You can upload a downloaded program from the inverter to the personal computer to search for the
source file that matches the program data. The search result will be displayed.
(1) Select "Upload" from the "Run" menu on the menu bar.
(You can also execute the "Upload" command by clicking the
pressing the "Ctrl + F12" keys on the keyboard.)
(2) The "Program Upload" dialog box appears.
Note: If the program currently being edited has not been compiled yet, a dialog box appears to ask you
whether to overwrite the program being edited. If you intend to overwrite, click the [Yes] button to
proceed.
(3) Click the [OK] button in the "Program Upload" dialog box to start uploading.
(4) After uploading ends, an end message dialog box appears. Click the [OK] button.
Note 1: The source files to be searched on the personal computer by this operation are those contained
in the "user" folder created in the same folder where EzSQ was installed. On the personal
computer, be sure to store all source files downloaded to the inverter in the "user" folder.
Note 2: If you have changed any settings of variables "U (00)" to "U (31)" in a program downloaded to the
inverter by using the digital operator of the inverter, any attempt to upload the program and
search for a matching source file ends with an unmatched result.
Chapter 4 How To Use EzSQ
icon under the menu bar or
4 - 17
End message indicating that the
uploaded program matched a
file in the source list
End message indicating that the
uploaded program did not match
any file in the source list