Operators ··································································································································3 - Hitachi SJ700-2 Series Instruction Manual

(2) Method of setting values in the variables
Follow the procedure below to set values in the variables. You can enter a calculation expression or
immediate value in the "Define" field for each variable.
1) Enter a calculation expression or immediate value in the "Define" field.
You can use the arithmetic operators and parentheses for the calculation expression. Each
immediate value to be entered and the calculation result must be within the upper and lower limits
set for the target variable.
2) After entering expressions or values for the variables, click the [Calculate] button.
3) The "Answer" field shows the calculation result for each variable.
* If the calculation expression entered for a variable references the same variable, an error message
appears.
Also, the "Result" field for the variable indicates "<Can't calculate>."
* If the value entered for a variable is not within the maximum and minimum limits set for the variable, an
error message appears.
Also, the "Result" field for the variable indicates "<Range invalid>."
3)
4 - 13
Chapter 4 How To Use EzSQ
2)