Mitsubishi Electric MELSEC iQ-R Series User Manual page 39

■Hub
Use the following switching hub.
Type
Industrial switching hub
*1 NZ2EHG-T8 is out of production.
Precautions
• Since there are different restrictions for system configuration using TSN hub and system configuration using general-
purpose hub, setting with an engineering tool is required. (Page 24 SYSTEM CONFIGURATION)
• Do not configure a ring topology when a module is connected to a hub. Doing so, all stations will fail and data link cannot be
performed.
Term Name
TSN hub CC-Link IE TSN-compatible switching hub (CC-Link Partner Association www.cc-
link.org)
General- • NZ2EHG-T8(N) (Mitsubishi Electric Corporation)
purpose hub • DT135TX (Mitsubishi Electric System & Service Co., Ltd.)
*1
6 WIRING
Authenticati
on
Class B
Class A
6
37