5.
Set the refresh settings as follows. Set the station number 1 and 2 of the local station to the same refresh settings.
[Navigation window] [Parameter] [Module Information] [RJ71GN11-T2] [Basic Settings] [Refresh Settings]
6.
Write the set parameters to the CPU module on the local station. Then reset the CPU module or power off and on the
system.
[Online] [Write to PLC]
In this example, default values are used for parameters that are not shown above. For the parameters, refer to
the following.
MELSEC iQ-R CC-Link IE TSN User's Manual (Application)
7 COMMUNICATION EXAMPLES
44
7.1 System Configuration Example