7.
Set the network configuration as follows.
[Navigation window] [Parameter] [Module Information] [RJ71GN11-T2] [Basic Settings] [Network
Configuration Settings]
8.
Set the refresh settings as follows.
[Navigation window] [Parameter] [Module Information] [RJ71GN11-T2] [Basic Settings] [Refresh Settings]
9.
Write the set parameters to the CPU module on the master station. Then reset the CPU module or power off and on the
system.
[Online] [Write to PLC]
In this example, default values are used for parameters that are not shown above. For the parameters, refer to
the following.
MELSEC iQ-R CC-Link IE TSN User's Manual (Application)
7 COMMUNICATION EXAMPLES
42
7.1 System Configuration Example