Mitsubishi Electric MELSEC iQ-R Series User Manual page 22

Ethernet connection
This function connects an Ethernet device to a module without interfering with CC-Link IE TSN.
Function
Connection with MELSOFT products and
a GOT
Connection with SLMP-compatible
devices
Security
This function ensures security according to the network environment by restricting access for each communication path to the
CPU module.
Function
IP filter
Remote password
RAS
This acronym stands for Reliability, Availability, and Serviceability. This function improves overall usability of automated
equipment.
Function
Slave station disconnection
Automatic return
Master station duplication detection
IP address duplication error
Time synchronization
Diagnostics
This function checks the network status and performs troubleshooting by executing diagnostics and operation tests using the
engineering tool.
Function
Diagnostics of the
module
CC-Link IE TSN/CC-Link IE Field
diagnostics
Diagnostics of other
network
3 FUNCTION LIST
20
Description
Allows programming and monitoring of the programmable controller using
the engineering tool, and monitoring and testing of the programmable
controller from the GOT via Ethernet.
Connects commercially available SLMP-compatible devices.
Description
Identifies the IP address of the access source, and prevents access and data
link from unauthorized IP addresses.
Permits or prohibits access from the external device to the CPU module via
the RJ71GN11-T2.
Description
In star topology, data link of the slave station where an error occurred is
stopped, and data link continues only for slave stations that are operating
normally.
In line topology, the slave station where an error occurred and all subsequent
stations are disconnected.
When the slave station disconnected due to the occurrence of an error
becomes normal, data link is automatically restarted.
If one network has multiple master stations, duplication is detected.
If one network has stations with the same IP address, duplication is
detected.
Ensures that all stations connected to CC-Link IE TSN have their times
synchronized with the time synchronization source (CPU module of the
master station).
Description
Module Checks the module hardware when the communication using the
communication RJ71GN11-T2 is unstable.
test
Checks the status of CC-Link IE TSN. The error locations, error causes,
corrective actions and so on are displayed on the engineering tool.
Communication Checks whether the communication route for transient transmission from the
test own station to the destination station is correct or not.
Availability
Master Local
Station Station
 
 
 
Availability
Master Local
Station Station
 
 
Availability
Master Local
Station Station
 
 
 
 
 
Availability
Master Local
Station Station
 
 
 