Table of Contents
Advertisement
Viewing last message
1. In the Messages menu, select
Last Msg Rcv.
2. Click Enter. The last message
received is shown, and
identifies the sender and
network used.
3. Use the Up/Down buttons to
scroll the last five messages
received.
Receiving a message
When you receive a text message from another UDI-14™ user, your UDI-14™ unit sounds an audible
signal, and the message is automatically displayed.
The received message identifies
the message sender and the
network on which it was sent.
Only if the message an SOS:
The depth of the diver sending the
message is also displayed in the
message.
In the example on the right, the
sender is Brad, at a depth of 8.3
meters
.
Click Enter to turn off the audible signal and return to the dive computer display.
Receiving SOS Signals
Unlike other UDI-14™ signals, SOS signals are activated across all network channels, and have a longer
range than ordinary communications signals.
If you receive an SOS signal, your UDI-14™ boat unit sounds an audible signal, and the SOS message is
automatically displayed.
The SOS message identifies the
user sending the SOS, the network,
and the depth of the sender.
In the example on the right, the
sender is Brad, at a depth of 32
meters
.
Click Enter to turn off the audible signal.
Remote SOS
The boat unit contains the ability to send a remote SOS signal to a UDI-14™ user.
Failure to respond within 15 seconds by the user receiving a remote SOS causes the receiving user UDI-
14™ to start sending SOS .
To activate the remote SOS:
SOS DETECTED
Brad
Net :4
Depth: 32
42
Advertisement
Table of Contents
