Table of Contents
Advertisement
3. In the Messages menu, User
to Send is selected.
Click Enter
4. In the Send To menu, choose
a user by scrolling with the
Up/Down buttons.
Click Enter.
5. In the Messages menu, Send
is selected.
6. Click Enter. The message is
sent. You are automatically
returned to the Main menu.
Viewing last message
1. In the Messages menu, select
Last Msg Rcv,
2. Click Enter. The last message
received is shown, and
identifies the sender and
network used.
3. Use the Up/Down buttons to
scroll the last five messages
received.
Receiving a message
When you receive a text message from your buddy or another UDI-28™ user, your UDI-28™ sounds an
audible signal and blinks light (if enabled), the message is automatically displayed.
The received message identifies
the message sender.
Only if the message is an SOS:
The depth of the diver sending the
message is also displayed in the
message.
In the example on the right, the
sender is Brad
.
Click Enter to turn off the sound
signal and automatically transmit
an acknowledgement signal to the
sender. After a short while, the
UDI-28™ returns to the dive info
display.
MESSAGES
5. Main
1. New Message
2. User to Send
SEND TO
2. Bob
MESSAGES
1. New Message
2. User to Send
3. Send
MESSAGES
3. Send
4. Last Msg Rcv
5. Main
MSG FROM
Brad
15:21
Boat above you !
25
Advertisement
Table of Contents
