Table of Contents
Advertisement
Contrast
Use this option to select a contrast level for the display. .
The contrast interval ranges from 1 (very little contrast) to 7 (high contrast).
Use the Up/Down buttons to
define a contrast value and press
Enter. Make sure there are no
strips seen on the screen.
Units
Use this option to select Metric units (meters, degrees C) or Imperial units (Feet, degrees F) as your unit
of measurement.
Select Imperial or Metric and press
Enter. All units displayed on the
UDI-14™ will now conform to the
unit type chosen.
NOTE: The temperature displays according to your units selection – When you select Feet, Fahrenheit
degrees are shown, when you select Meters, centigrade degrees are shown.
About UDI-14™
Use this option to view the UDI-14™ serial number, and software version installed. Use this information
when contacting UTC about your UDI-14™.
In addition the About UDI screen presents the table tag value, which is a unique code for each specific
UDI-14™ list of users and messages. Make sure that every UDI-14™ device and boat unit (in the same
network) has the same Table Tag value. For more information see page 5.
Revert to factory settings:
In case you would like to revert to the original UDI-14™ factory settings, press the Up, Down and Enter
buttons simultaneously to start the UDI-14™ on. Wait for the UDI-14™ to turn on and for the message
"set default" appears on the screen. All customizations and settings you have done will be erased, and
UDI-14™ will turn on with the original factory settings.
CONTRAST
Cont r ast : 7
25
Advertisement
Table of Contents
