Connecting The Udi-14™ To The Pc - UTC UDI-14 User Manual

NOTE: A steady or flashing red LED indicates a problem with the charger or the battery. Disconnect the
charger and repeat steps 2 to 4. If this does not resolve the problem, return the unit for service
Connecting the UDI-14™ to the PC
You can connect the UDI-14™ to the PC to perform data transfers, and dive simulations using the
DiveSim™ application. See page 48 for information on using DiveSim™.
To connect the UDI-14™ to the PC:
1. Connect the quick connector to the UDI-14™
2. Connect the USB cable to the quick connector.
3. Connect the USB cable to the computer.
NOTE: Ensure that you have properly installed the DiveSim™ software to be able to use this function.
To activate the connection to the PC, you must enable this option on the UDI-14™. See page
22.
12