Table of Contents
Advertisement
Dive has reached
decompression time.
Dive has reached
decompression time – Hold the
Enter button for 5 seconds to
see this display.
A
or
displays in the bottom left quadrant, accompanied by a tone to inform you to go up or down
when you overstep the bounds of decompression or safe diving time.
Dive computer parameters
Battery Indicator – Battery energy level.
Buddy – Name of buddy who will receive messages by default.
Ceil – Ceiling height for Decompression stop. The minimum depth allowed while in
decompression stop, in steps of 3 meters.
Deco time – Decompression time in minutes.
Depth - Current Depth indicator – Indicates current depth.
Dive time – Duration of current dive, in minutes.
Safe – Indicates Safety stop depth, between 3 - 6 meters.
Stop – Indicates Deep stop depth in a layer of 3 meters below the Deep stop.
EAN – Enriched Air Nitrox – indicates mixture percentage.
Fly Time – The minimum time required prior to flying (in Hours format HH:MM).
Heading – Heading direction in degrees from north.
Mdepth – Maximum depth achieved in current dive.
Net – Network used for communications.
No Deco – The remaining time before getting into decompression situation, at the depth shown (in
minutes).
PO2 Depth – Maximum depth allowed before Oxygen toxicity related to the PPO2 pressure
between 1.4 to 1.6 Atm.
Safe time – Safety stop time. Down counter from 3 minutes to zero.
SIT – Surface Interval Time - Counting the time the diver is out of the water to be calculated till the
next repetitive dive. When reaching to 24 hours, the dive computer will start a new dive session
(no Nitrogen residues).
Surf Time – The minimum expected time to the surface, taking in account all needed stops, in
minutes.
33.4
Current Depth:
Dive Time:
37.0
MAX Depth:
Time to surface:
22
Deco Time:
Ceiling:
33.4
Current Depth:
Dive Time:
37.0
MAX Depth:
Time to surface:
12
Safe Time:
Dsafe:
27
25
15
12
25
15
6
Advertisement
Table of Contents
