Using The Quick Connector; Charging The Udi-14 - UTC UDI-14 User Manual

Using the quick connector

A quick connector is used to connect the UDI-14™ unit to a power supply or to a PC.
Attach the quick connector to the UDI-14™ as show below, ensure the contacts are dry.
1. Quick Connector

Charging the UDI-14™

UDI-14™ uses a rechargeable internal Li battery. This battery can be recharged only with the UDI-14™
charger.
Lithium Polymer Charging, Handling, Safety Information
NOTE: Read
WARNING: The UDI-14™ is a completely sealed unit. It may stop functioning if opened. The warranty
will be void if the unit is disassembled or the seal is broken.
Ensure that the UDI-14™ is fully charged before your dive.
Charge the battery for 12 hours prior to the first time you use the UDI-14™.
To charge the UDI-14™:
1. Ensure that your hands, the UDI-14™ and the charger are dry!
2. Connect the quick adapter to the UDI-14™
3. Connect the power charger to the quick connector.
4. Connect the power charger to a power supply. The green LED will turn on.
5. The charge is complete when the green light on the quick connector turns off.
1
2
2. Connector bracket on UDI-14™
on page 4.
11