Table of Contents
Advertisement
In Gauge mode:
•
Press the Down button
see the compass.
•
Press the UP button to
return to the main screen
Abnormal conditions
Low battery prior to a dive
If the battery status becomes
empty prior to a dive, and the
diver decides to dive despite this
warning, the UDI-14™ locks the
dive computer automatically for 24
hours starting at the end of the
dive and will ask the diver to
charge it.
UDI-14™ will continue to work as a timer and depth meter (gauge mode) only and will not calculate the
decompression parameters or other dive computer parameters.
WARNING: The UDI-14™ may turn itself off during the dive.
Low battery during dive
When the battery contains less than 3 hours charge, UDI-14™ will display a warning message and sound
an alert tone. Click Enter to return to the dive computer display.
When the battery contains less than 2 hours charge, UDI-14™ will display an additional warning message
and sound an alert tone. Click Enter to return to the dive computer display.
When the battery contains less than 1 hours charge, UDI-14™ will display yet another warning message
and sound an alert tone. Click Enter to return to the dive computer display.
Each transmission is shortening the battery time of operation.
WARNING: In all cases of low battery alert, start ascent immediately, according to safe diving practice,
and recharge the UDI-14™ after you reach the surface.
Empty battery during dive
If the battery status becomes
empty during a dive, the battery
icon starts to flash in addition to
the UDI-14™ sounding an alert
tone. This indicates that the UDI-
14™ can continue to work for a
15.4
25
depth
32.0
dive time
max
24
124
No deco
29
Advertisement
Table of Contents
