Table of Contents
Advertisement
UDI-14™ Setup
Use the UDI-14™ Setup menu options to set the time, ring volume, light, units and other features as
follows:
Clock
Use this option to set the time and date.
1. Press Enter to select a time
unit.
2. Use the Up/Down buttons to
set the appropriate value.
3. Press Enter to move to the
next time unit on the list.
4. Repeat.
5. When you have set the year
value, press Enter to return to
the UDI-14™ Setup menu.
Audio
Use this option to select an audio alert volume. Audio alerts sound to get your attention to the dive
computer under various events during a dive.
There are five levels of alert:
1. High
2. Med-High
3. Med
4. Low
5. Off
Select a ring level and press Enter
Backlight
Use this option to select the time until the UDI-14™ backlight turns off. The shutoff ranges from 0 (off) to
55 seconds in 5 second intervals, and INF (infinite) when the backlight remains constantly lit.
NOTE: Extended use of the light may reduce battery time between charges.
LED Control / this screen exist only in LCD version
Use this option to turn on or off the LED control which allows the LED on the UDI-14™ to blink when there
is an audible alarm or when a signal is received.
Select Enable or Disable and press
Enter.
Default: Enable
LED CONTROL
1. Enable
2. Disable
24
Advertisement
Table of Contents
