Table of Contents
Advertisement
Using the Dive computer
The dive computer display contains a current and maximum depth indicator, a battery indicator, compass,
surface interval time (SIT), and fly time displays as well as additional parameters, depending on the dive
characteristics.
The dive computer display is the normal display mode that you use while diving.
From the dive computer, you can:
Press the Up button to review your RGBM setup.
Press the Down button to review additional dive data.
Press the Enter button twice to go to the Main menu.
The dive computer display is different when the UDI-14™ is on the surface, and when the UDI-14™ is
underwater.
Surface display
On the surface, the dive computer display shows the following:
1. Current Depth and EAN indicator
2. Network & Buddy indicator
Underwater display
Underwater, computer alternates between several displays, depending on your actual dive parameters:
Dive has not reached
decompression time.
Dive has not reached
decompression time – Press
the Enter button once to see
this display. The display stays
on for 7 seconds and then
returns to the original display.
3. Battery indicator
4. Oxygen toxic limit depth
5. Surface interval time
15.4
Dive
Depth:
Time:
Surf
32.0
Dmax:
Time:
22
Safe depth:
Safe Time:
26
25
15
12
Advertisement
Table of Contents
