Charging The Udi-14™ Boat Unit; Connecting The Udi-14™ Boat Unit To The Pc - UTC UDI-14 User Manual

Lcd and oled versions
Table of Contents

Advertisement

The boat unit Antenna is shown below:
The UDI-14™ boat unit contains the following functions:
Electronic compass
Message sending/receiving
Homing beacon
Dive logger
Use of these functions is explained below.
Charging the UDI-14™ boat unit
UDI-14™ uses a rechargeable internal battery. You can use the boat unit running on a battery, or
connected to a power supply.
Connect the power adapter to the power connector on the UDI-14™ boat unit to recharge the battery or
to use the unit.
Lithium Polymer Charging, Handling, Safety Information
NOTE:
Read
WARNING: The UDI-14™ boat unit is a completely sealed unit and meets IP67 standard. It may stop
functioning if opened. The warranty will be void if the unit is disassembled or the seal is broken.
Connecting the UDI-14™ boat unit to the PC
You can connect the UDI-14™ boat unit to the PC to perform data transfers (messages list, users list),
using the DiveSim™ application. (See page 48 for information on using DiveSim™).
To connect the UDI-14™ boat unit to the PC:
Connect the USB cable to the computer.
Version II
39
on page 4.

Advertisement

Table of Contents
loading

Table of Contents