Using the UDI-14™
Turning UDI-14™ On and Off
To turn the UDI-14™ on:
1. Press and hold the Enter button for about 5 seconds. The UTC Proprietary screen opens.
(If pushing the Enter button for a short time, a message on the screen will appear mentioning the
need for a longer push)
NOTE: The UTC Proprietary screen contains a disclaimer. Clicking on the Enter button signifies that you
accept responsibility for use of the UDI-14™, and that you accept the terms of the disclaimer.
If you do not agree, please do not dive with the UDI-14™.
2. Press the Enter button again. The current settings screen opens.
3. Press the Enter button again. The setup menu opens. After a few seconds, the dive computer
displays.
Standby mode:
The UDI-14™ unit goes into Standby mode after 10 minutes of inactivity on the surface.
The UDI-14™ unit goes from Standby to Off after 1 hour of inactivity on the surface.
When in Standby mode, the UDI-14™ unit instantly returns to use upon contact with water, or
when a button is pushed for 2 seconds.
To turn UDI-14™ off:
Press and hold the Enter button for about 4-6 seconds. The UDI-14™ turns off.
WARNING:
Power cannot be turned off during a dive.
Scrolling the menus
To scroll through the menu options, press the Up or Down buttons.
To select an option, press the Enter button.
13