Table of Contents
Advertisement
Gauge mode
NOTE: User must be aware that in this mode of operation, alerts related to the dive computer will NOT
be provided.
WARNING: When the UDI-14™ is in gauge mode, it only measures the time and depth. It DOES NOT
function as a dive computer, and DOES NOT calculate nitrogen levels.
In addition, the UDI-14™ does not provide any alerts when in gauge mode.
Re-enabling the dive computer results in a "New Diver". In this case, the dive computer resets
the dive information, the UDI-14™'s algorithm assumes no dive in the last 24 hours.
If the diver dove within the last 24hours, DO NOT USE the UDI-14™ or DO NOT rely on the
values presented.
Enable/Disable Gauge mode
To enable the Gauge mode:
1. From the Main menu, select Setup and press Enter.
2. From the Setup menu, select Gauge mode and press Enter.
Select Enable and press Enter
The default: Disable
If the UDI-14™ was not in Gauge
mode and you select Enable, the
following disclaimer is presented
The next step requires approval:
In Gauge mode, the dive computer
presents the following screen:
20
Net : 1
Depth
Buddy :
User 2
21
Dmax
GAUGE
110
124
MODE
No deco
16
Advertisement
Table of Contents
