Table of Contents
Advertisement
RGBM Setup
Use the RGBM Setup options to set the features of the RGBM model for use with the dive computer.
The RGBM Setup flowchart is shown below.
RGBM
Setup
Entering/Exiting RGBM Setup mode
To enter RGBM Setup mode:
•
From the Main menu, select Setup and press Enter.
•
From the Setup menu, select RGBM Setup and press Enter.
To exit RGBM Setup mode:
Use the Up/ Down buttons to scroll to SETUP, and press Enter this automatically saves all parameters
and configurations that you defined.
The saved parameters will be used as the default settings until such time that you modify them again.
1. Water
2. Altitude
3. Nitrox
4. RGBM
Model
Disable/ Enable
5. Deep Stops
6. Dive Plan
7. New Diver
8. Setup
Water (list)
Altitude (list)
EAN 21-99
List 1 to 5
Scroll up/down
18
Advertisement
Table of Contents
