Table of Contents
Advertisement
In the event of an emergency, you can activate your SOS signal by pressing the red H (Help) button on
your UDI-14™ for several seconds. An SOS signal is sent to all UDI-14™ users and boat units in the area.
Other UDI-14™ users can then home in and navigate to your location using the Navigation feature of their
units.
If you receive an SOS signal, your UDI-14™ unit sounds an audible signal, and the SOS message is
automatically displayed.
The SOS message identifies the
user sending the SOS, the network,
and the depth of the sender.
In the example on the right, the
sender is User 1, at a depth of 32
meters
.
Click Enter to turn off the audible
signal. UDI-14™ displays the
Navigation Mode screen.
Navigate to the diver in distress described on page 33.
Remote homing
UDI-14™ contains the ability to send a remote homing signal to the boat unit.
The remote homing signal takes the form of a message that cannot be modified or deleted from the
message list.
To activate the remote homing or remote SOS:
1. In the Message menu, select
Remote Homing from the list
by scrolling with the
Up/Down buttons, then click
Enter.
2. Click Send. The message is
sent
EMERGENCY (HELP) BUTTON
SOS DETECTED
User 1
Net :4
Depth: 32 m
35
Advertisement
Table of Contents
