Table of Contents
Advertisement
NOTE: Ensure that you have properly installed the DiveSim™ software to be able to use this function.
Turning UDI-14™ boat unit On and Off
To turn the UDI-14™ boat unit on:
1. Press and hold the Enter button for about 4 seconds. The UTC Proprietary screen opens, the
buzzer is heard and the LED is blinking.
2. Press the Enter button again. The current settings screen opens.
3. Press the Enter button again. The main menu opens.
To turn UDI-14™ boat unit off:
Press and hold the Enter button for about 4 seconds. The UDI-14™ turns off.
Scrolling the menus
To scroll through the menu options, press the Up or Down buttons.
To select an option, press the Enter button.
UDI-14™ Boat unit main menu
The main UDI-14™ menu allows you to access UDI-14™ functions. The main menu flowchart is shown
below.
The various functions are described in detail as follows:
1. Messages – see page 40
2. Compass – see page 42
3. Transmit homing – see page 44
4. Setup – see page 45
Sending and receiving text messages
Messages are pre-set using the PC connection and UDI-14™ software. To modify the pre-set message list,
see page 51.
You can send messages to UDI-14™ users on the same network using the Send Message function.
WARNING: When transmitting messages, the antenna cable must be plugged into the boat unit.
40
Advertisement
Table of Contents
