Turning Udi-28™ Boat Unit On And Off; Scrolling The Menus; Udi-28™ Boat Unit Main Menu; Sending And Receiving Text Messages - UTC UDI-28 User Manual

Turning UDI-28™ boat unit On and Off
To turn the UDI-28™ boat unit on:
1. Press and hold the Enter button for about 5 seconds. The UTC Proprietary screen opens, the
buzzer is heard and the LED is blinking.
2. Press the Enter button again. The current settings screen opens.
Press the Enter button again. The main menu opens.
To turn UDI-28™ boat unit off:
Press and hold the Enter button for about 5 seconds. The UDI-28™ turns off.

Scrolling the menus

To scroll through the menu options, press the Up or Down buttons.
To select an option, press the Enter button.
UDI-28™ Boat unit main menu
The main UDI-28™ menu allows you to access UDI-28™ functions. The main menu flowchart is shown
below.
The various functions are described in detail as follows:
 Messages – see page 33
 Compass – see page 36
 Transmit homing – see page 38
 Setup – see page 38

Sending and receiving text messages

Messages are pre-set using the PC connection and UDI-28™ software. To modify the pre-set message
list, See the UDI28-MANAGER user manual.
WARNING: When transmitting messages, the antenna cable must be plugged into the boat unit.
Main 1. Messages
2. Compass
3. Trans.
Homing
4. Setup
33