Connecting The Udi-28™ To The Pc - UTC UDI-28 User Manual

NOTE: A steady or flashing red LED indicates a problem with the charger or the battery. Disconnect
the charger and repeat steps 2 to 4. If this does not resolve the problem, return the unit for
service
Connecting the UDI-28™ to the PC
You can connect the UDI-28™ to the PC to perform data transfers, using the UDI28-MANAGER
application. For information see UDI28-MANAGER Software User Manual.
To connect the UDI-28™ to the PC, turn On the UDI-28:
1. Connect the quick connector to the UDI-28
2. Connect the USB cable to the quick connector.
3. Connect the USB cable to the computer.
4. DO NOT turn off the UDI-28 when connected to PC.
NOTE: Ensure that you have properly installed the UDI28-MANAGER software to be able to use this
function.
To activate the connection to the PC, you must enable this option on the UDI-28. See page
16.
12